MOCN Lab — Configure, Commit, Verify

Stand up a shared 5G MOCN cell exactly as an engineer does: set two operators and a sharing model, commit, decode SIB1, then drive offered load and watch the per-PLMN PRB KPIs react. Inject a fault and prove the fix.

Configure the shared cell

editable

Channel bandwidth

Sharing model

Op A MCC/MNC

Op B MCC/MNC

Op A offered load 45% of cell

Op B offered load 30% of cell

SIB1 broadcast (decoded)

after commit

Live per-PLMN PRB KPIs — drive the offered-load sliders

Fam 5241

Op A allocated PRB—

Op A demand—

Served—

Status—

Op B allocated PRB—

Op B demand—

Served—

Status—

PRB utilization_PLMN = DLUsedPrbPlmn ÷ DLAvailablePrbPlmn × 100 — Fam 5241 · sustained 100% + unmet demand ⇒ starved

Verify checklist

—

Fault injection — diagnose & fix

troubleshoot

✓

Cell healthy — both PLMNs served, KPIs within target.

That's the MOCN loop — configure → commit → verify → tune → fix.

The PRB split you set drives the per-PLMN KPI you'd read on the live cell (Fam 5241). Change one thing, watch the KPI, keep every operator inside its SLA.

Golden parameters ›Engineer runbook